diff options
| -rw-r--r-- | m4/esd.m4 | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/m4/esd.m4 b/m4/esd.m4 new file mode 100644 index 00000000..cbc6cec0 --- /dev/null +++ b/m4/esd.m4 @@ -0,0 +1,188 @@ +# Configure paths for ESD +# Manish Singh 98-9-30 +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS +dnl +AC_DEFUN(AM_PATH_ESD, +[dnl +dnl Get the cflags and libraries from the esd-config script +dnl +AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)], + esd_prefix="$withval", esd_prefix="") +AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)], + esd_exec_prefix="$withval", esd_exec_prefix="") +AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program], + , enable_esdtest=yes) + + if test x$esd_exec_prefix != x ; then + esd_args="$esd_args --exec-prefix=$esd_exec_prefix" + if test x${ESD_CONFIG+set} != xset ; then + ESD_CONFIG=$esd_exec_prefix/bin/esd-config + fi + fi + if test x$esd_prefix != x ; then + esd_args="$esd_args --prefix=$esd_prefix" + if test x${ESD_CONFIG+set} != xset ; then + ESD_CONFIG=$esd_prefix/bin/esd-config + fi + fi + + AC_PATH_PROG(ESD_CONFIG, esd-config, no) + min_esd_version=ifelse([$1], ,0.2.7,$1) + AC_MSG_CHECKING(for ESD - version >= $min_esd_version) + no_esd="" + if test "$ESD_CONFIG" = "no" ; then + no_esd=yes + else + ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags` + ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs` + + esd_major_version=`$ESD_CONFIG $esd_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + esd_minor_version=`$ESD_CONFIG $esd_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_esdtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $ESD_CFLAGS" + LIBS="$LIBS $ESD_LIBS" +dnl +dnl Now check if the installed ESD is sufficiently new. (Also sanity +dnl checks the results of esd-config to some extent +dnl + rm -f conf.esdtest + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <esd.h> + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.esdtest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_esd_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_esd_version"); + exit(1); + } + + if (($esd_major_version > major) || + (($esd_major_version == major) && ($esd_minor_version > minor)) || + (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version); + printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n"); + printf("*** to point to the correct copy of esd-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_esd" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$ESD_CONFIG" = "no" ; then + echo "*** The esd-config script installed by ESD could not be found" + echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the ESD_CONFIG environment variable to the" + echo "*** full path to esd-config." + else + if test -f conf.esdtest ; then + : + else + echo "*** Could not run ESD test program, checking why..." + CFLAGS="$CFLAGS $ESD_CFLAGS" + LIBS="$LIBS $ESD_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include <esd.h> +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding ESD or finding the wrong" + echo "*** version of ESD. If it is not finding ESD, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means ESD was incorrectly installed" + echo "*** or that you have moved ESD since it was installed. In the latter case, you" + echo "*** may want to edit the esd-config script: $ESD_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + ESD_CFLAGS="" + ESD_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(ESD_CFLAGS) + AC_SUBST(ESD_LIBS) + rm -f conf.esdtest +]) + +dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]]) +dnl Test, whether esd supports multiple recording clients (version >=0.2.21) +dnl +AC_DEFUN(AM_ESD_SUPPORTS_MULTIPLE_RECORD, +[dnl + AC_MSG_NOTICE([whether installed esd version supports multiple recording clients]) + ac_save_ESD_CFLAGS="$ESD_CFLAGS" + ac_save_ESD_LIBS="$ESD_LIBS" + AM_PATH_ESD(0.2.21, + ifelse([$1], , [ + AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true) + AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1, + [Define if you have esound with support of multiple recording clients.])], + [$1]), + ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2]) + if test "x$ac_save_ESD_CFLAGS" != x ; then + ESD_CFLAGS="$ac_save_ESD_CFLAGS" + fi + if test "x$ac_save_ESD_LIBS" != x ; then + ESD_LIBS="$ac_save_ESD_LIBS" + fi + ) +]) |