ladspa
All LADSPA plugins
../../ext/ladspa/.libs/libgstladspa.so
libgstladspa.so
0.10.10.1
LGPL
gst-plugins-bad
GStreamer Bad Plug-ins CVS/prerelease
http://gstreamer.freedesktop.org
ladspa-adsr
ADSR Hüllkurve
Filter/Effect/Audio/LADSPA
ADSR Hüllkurve
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Envelope_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Driving_Signal
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-adsr-g+t
ADSR Hüllkurve mit Gatter und Auslöseimpuls
Filter/Effect/Audio/LADSPA
ADSR Hüllkurve mit Gatter und Auslöseimpuls
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Envelope_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Ausl--ser
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-alias
Aliasing
Filter/Effect/Audio/LADSPA
Aliasing
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-allpass-c
Allpass delay line, cubic spline interpolation
Filter/Effect/Audio/LADSPA
Allpass delay line, cubic spline interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-allpass-l
Allpass delay line, linear interpolation
Filter/Effect/Audio/LADSPA
Allpass delay line, linear interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-allpass-n
Allpass delay line, noninterpolating
Filter/Effect/Audio/LADSPA
Allpass delay line, noninterpolating
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-am
Amplitude Modulator
Filter/Effect/Audio/LADSPA
Amplitude Modulator
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_2
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_1
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amPitchshift
AM pitchshifter
Filter/Effect/Audio/LADSPA
AM pitchshifter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amp
Simple amplifier
Filter/Effect/Audio/LADSPA
Simple amplifier
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amp-gaia-oa
Amplifier (GAIA)
Filter/Effect/Audio/LADSPA
Amplifier (GAIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Verst--rkung_-dB-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amp-gcia-oa
Amplifier (GCIA)
Filter/Effect/Audio/LADSPA
Amplifier (GCIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amp-mono
Mono Amplifier
Filter/Effect/Audio/LADSPA
Mono Amplifier
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-amp-stereo
Stereo Amplifier
Filter/Effect/Audio/LADSPA
Stereo Amplifier
Richard Furse (LADSPA example plugins)
Output_-Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Right-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Left-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-analogue
Analogue Voice
Source/Audio/LADSPA
Analogue Voice
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-analogueOsc
Analogue Oscillator
Source/Audio/LADSPA
Analogue Oscillator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-artificialLatency
Artificial latency
Filter/Effect/Audio/LADSPA
Artificial latency
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-autoPhaser
Auto phaser
Filter/Effect/Audio/LADSPA
Auto phaser
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bandpass-a-iir
Glame Bandpass Analog Filter
Filter/Effect/Audio/LADSPA
Glame Bandpass Analog Filter
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bandpass-iir
Glame Bandpass Filter
Filter/Effect/Audio/LADSPA
Glame Bandpass Filter
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bf-rotate-z
Ambisonic Rotation (B-Format, Horizontal)
Filter/Effect/Audio/LADSPA
Ambisonic Rotation (B-Format, Horizontal)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Z-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Y-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-X-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-W-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bf2cube
Ambisonic Decoder (B-Format to Cube)
Filter/Effect/Audio/LADSPA
Ambisonic Decoder (B-Format to Cube)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Top_Back_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Top_Back_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Top_Front_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Top_Front_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Base_Back_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Base_Back_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Base_Front_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Base_Front_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bf2quad
Ambisonic Decoder (B-Format to Quad)
Filter/Effect/Audio/LADSPA
Ambisonic Decoder (B-Format to Quad)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Back_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Back_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Front_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Front_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bf2stereo
Ambisonic Decoder (B-Format to Stereo)
Filter/Effect/Audio/LADSPA
Ambisonic Decoder (B-Format to Stereo)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bodeShifter
Bode frequency shifter
Filter/Effect/Audio/LADSPA
Bode frequency shifter
Steve Harris <steve@plugin.org.uk>
Up_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Down_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bodeShifterCV
Bode frequency shifter (CV)
Filter/Effect/Audio/LADSPA
Bode frequency shifter (CV)
Steve Harris <steve@plugin.org.uk>
Mix_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Up_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Down_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Shift_CV
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-branch-ia-oaoa
Signal Branch (IA)
Filter/Effect/Audio/LADSPA
Signal Branch (IA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Second_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
First_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-branch-ic-ococ
Signal Branch (IC)
Source/Audio/LADSPA
Signal Branch (IC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-butthigh-iir
GLAME Butterworth Highpass
Filter/Effect/Audio/LADSPA
GLAME Butterworth Highpass
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-buttlow-iir
GLAME Butterworth Lowpass
Filter/Effect/Audio/LADSPA
GLAME Butterworth Lowpass
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-bwxover-iir
Glame Butterworth X-over Filter
Filter/Effect/Audio/LADSPA
Glame Butterworth X-over Filter
Alexander Ehlert <mag@glame.de>
HP-Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
LP-Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-canyon-delay
Canyon Delay
Filter/Effect/Audio/LADSPA
Canyon Delay
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out_-Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Out_-Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
In_-Right-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
In_-Left-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-chebstortion
Chebyshev distortion
Filter/Effect/Audio/LADSPA
Chebyshev distortion
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-comb
Comb Filter
Filter/Effect/Audio/LADSPA
Comb Filter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-comb-c
Comb delay line, cubic spline interpolation
Filter/Effect/Audio/LADSPA
Comb delay line, cubic spline interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-comb-l
Comb delay line, linear interpolation
Filter/Effect/Audio/LADSPA
Comb delay line, linear interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-comb-n
Comb delay line, noninterpolating
Filter/Effect/Audio/LADSPA
Comb delay line, noninterpolating
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-combSplitter
Comb Splitter
Filter/Effect/Audio/LADSPA
Comb Splitter
Steve Harris <steve@plugin.org.uk>
Output_2
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_1
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-compress-peak
Simple Compressor (Peak Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Compressor (Peak Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-compress-rms
Simple Compressor (RMS Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Compressor (RMS Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-const
Constant Signal Generator
Filter/Effect/Audio/LADSPA
Constant Signal Generator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-crossoverDist
Crossover distortion
Filter/Effect/Audio/LADSPA
Crossover distortion
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dahdsr-cg+t-control
DAHDSR Envelope with Control Gate and Trigger (Control Inputs)
Source/Audio/LADSPA
DAHDSR Envelope with Control Gate and Trigger (Control Inputs)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Envelope_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dahdsr-g+t-audio
DAHDSR Hullkurve mit Gatter und Auslöseimpuls (Audio Eingänge)
Filter/Effect/Audio/LADSPA
DAHDSR Hullkurve mit Gatter und Auslöseimpuls (Audio Eingänge)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Envelope_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Ausklingzeit_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Haltewert
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Abklingzeit_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Haltezeit_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Einschwingzeit_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Verz--gerungszeit_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Ausl--ser
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dahdsr-g+t-control
DAHDSR Hüllkurve mit Gatter und Auslöseimpuls (Kontroll Eingänge)
Filter/Effect/Audio/LADSPA
DAHDSR Hüllkurve mit Gatter und Auslöseimpuls (Kontroll Eingänge)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Envelope_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Ausl--ser
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dcRemove
DC Offset Remover
Filter/Effect/Audio/LADSPA
DC Offset Remover
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-decay
Exponential signal decay
Filter/Effect/Audio/LADSPA
Exponential signal decay
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-decimator
Decimator
Filter/Effect/Audio/LADSPA
Decimator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-declip
Declipper
Filter/Effect/Audio/LADSPA
Declipper
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-0-01s
Echo Delay Line (Maximum Delay 0,01s)
Filter/Effect/Audio/LADSPA
Echo Delay Line (Maximum Delay 0,01s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-0-1s
Echo Delay Line (Maximum Delay 0,1s)
Filter/Effect/Audio/LADSPA
Echo Delay Line (Maximum Delay 0,1s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-1s
Echo Delay Line (Maximum Delay 1s)
Filter/Effect/Audio/LADSPA
Echo Delay Line (Maximum Delay 1s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-5s
Simple Delay Line
Filter/Effect/Audio/LADSPA
Simple Delay Line
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-60s
Echo Delay Line (Maximum Delay 60s)
Filter/Effect/Audio/LADSPA
Echo Delay Line (Maximum Delay 60s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-c
Simple delay line, cubic spline interpolation
Filter/Effect/Audio/LADSPA
Simple delay line, cubic spline interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-l
Simple delay line, linear interpolation
Filter/Effect/Audio/LADSPA
Simple delay line, linear interpolation
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delay-n
Simple delay line, noninterpolating
Filter/Effect/Audio/LADSPA
Simple delay line, noninterpolating
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-delayorama
Delayorama
Filter/Effect/Audio/LADSPA
Delayorama
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-difference-iama-oa
Signal Difference (IAMA)
Filter/Effect/Audio/LADSPA
Signal Difference (IAMA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Difference_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_to_Subtract
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-difference-iamc-oa
Signal Difference (IAMC)
Filter/Effect/Audio/LADSPA
Signal Difference (IAMC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Difference_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-difference-icma-oa
Signal Difference (ICMA)
Filter/Effect/Audio/LADSPA
Signal Difference (ICMA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Difference_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_to_Subtract
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-difference-icmc-oc
Signal Difference (ICMC)
Source/Audio/LADSPA
Signal Difference (ICMC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-diode
Diode Processor
Filter/Effect/Audio/LADSPA
Diode Processor
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-disintegrator
Disintegrator
Filter/Effect/Audio/LADSPA
Disintegrator
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-divider
Audio Divider (Suboctave Generator)
Filter/Effect/Audio/LADSPA
Audio Divider (Suboctave Generator)
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dj-eq
DJ EQ
Filter/Effect/Audio/LADSPA
DJ EQ
Steve Harris <steve@plugin.org.uk>
Output_R
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_L
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_R
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_L
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dj-eq-mono
DJ EQ (mono)
Filter/Effect/Audio/LADSPA
DJ EQ (mono)
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-djFlanger
DJ flanger
Filter/Effect/Audio/LADSPA
DJ flanger
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-dysonCompress
Dyson compressor
Filter/Effect/Audio/LADSPA
Dyson compressor
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-encode-bformat
Ambisonic Encoder (B-Format)
Filter/Effect/Audio/LADSPA
Ambisonic Encoder (B-Format)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Z-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Y-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-X-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-W-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-encode-fmh
Ambisonic Encoder (FMH-Format)
Filter/Effect/Audio/LADSPA
Ambisonic Encoder (FMH-Format)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-V-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-U-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-T-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-S-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-R-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Z-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Y-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-X-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-W-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-expand-peak
Simple Expander (Peak Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Expander (Peak Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-expand-rms
Simple Expander (RMS Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Expander (RMS Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fadDelay
Fractionally Addressed Delay Line
Filter/Effect/Audio/LADSPA
Fractionally Addressed Delay Line
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fastLookaheadLimiter
Fast Lookahead limiter
Filter/Effect/Audio/LADSPA
Fast Lookahead limiter
Steve Harris <steve@plugin.org.uk>
Output_2
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_1
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_2
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_1
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fbdelay-0-01s
Feedback Delay Line (Maximum Delay 0,01s)
Filter/Effect/Audio/LADSPA
Feedback Delay Line (Maximum Delay 0,01s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fbdelay-0-1s
Feedback Delay Line (Maximum Delay 0,1s)
Filter/Effect/Audio/LADSPA
Feedback Delay Line (Maximum Delay 0,1s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fbdelay-1s
Feedback Delay Line (Maximum Delay 1s)
Filter/Effect/Audio/LADSPA
Feedback Delay Line (Maximum Delay 1s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fbdelay-5s
Feedback Delay Line (Maximum Delay 5s)
Filter/Effect/Audio/LADSPA
Feedback Delay Line (Maximum Delay 5s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fbdelay-60s
Feedback Delay Line (Maximum Delay 60s)
Filter/Effect/Audio/LADSPA
Feedback Delay Line (Maximum Delay 60s)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-flanger
Flanger
Filter/Effect/Audio/LADSPA
Flanger
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmOsc
FM Oscillator
Filter/Effect/Audio/LADSPA
FM Oscillator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequency_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmh-rotate-z
Ambisonic Rotation (FMH-Format, Horizontal)
Filter/Effect/Audio/LADSPA
Ambisonic Rotation (FMH-Format, Horizontal)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-V-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-U-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-T-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-S-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-R-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Z-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Y-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-X-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-W-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-V-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-U-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-T-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-S-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-R-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmh2bf
FMH-Format to B-Format (Discards RSTUV Channels)
Filter/Effect/Audio/LADSPA
FMH-Format to B-Format (Discards RSTUV Channels)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Z-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Y-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-X-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-W-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-V-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-U-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-T-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-S-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-R-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmh2oct
Ambisonic Decoder (FMH-Format to Octagon)
Filter/Effect/Audio/LADSPA
Ambisonic Decoder (FMH-Format to Octagon)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output_-Front_Left_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Back_Left_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Back_Back_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Back_Back_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Back_Right_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Front_Right_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Front_Front_Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Front_Front_Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-V-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-U-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-T-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-S-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-R-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Z-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Y-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-X-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-W-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmod-fama-oa
Frequenz Modulator (FAMA)
Filter/Effect/Audio/LADSPA
Frequenz Modulator (FAMA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Modulierte_Frequenz_-Hz-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Modulation_-Octaves-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmod-famc-oa
Frequenz Modulator (FAMC)
Filter/Effect/Audio/LADSPA
Frequenz Modulator (FAMC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Modulierte_Frequenz_-Hz-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmod-fcma-oa
Frequenz Modulator (FCMA)
Filter/Effect/Audio/LADSPA
Frequenz Modulator (FCMA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Modulierte_Frequenz_-Hz-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Modulation_-Octaves-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fmod-fcmc-oc
Frequenz Modulator (FCMC)
Source/Audio/LADSPA
Frequenz Modulator (FCMC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-foldover
Foldover distortion
Filter/Effect/Audio/LADSPA
Foldover distortion
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-fourByFourPole
4 x 4 pole allpass
Filter/Effect/Audio/LADSPA
4 x 4 pole allpass
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-foverdrive
Fast overdrive
Filter/Effect/Audio/LADSPA
Fast overdrive
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-freeverb3
Freeverb (Version 3)
Filter/Effect/Audio/LADSPA
Freeverb (Version 3)
CMT (http://www.ladspa.org/cmt, plugin by Jezar at Dreampoint, ported by Richard W.E. Furse)
Output_-Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_-Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Right-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_-Left-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-freqTracker
Frequency tracker
Filter/Effect/Audio/LADSPA
Frequency tracker
Steve Harris <steve@plugin.org.uk>
Frequency_-Hz-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-gate
Gate
Filter/Effect/Audio/LADSPA
Gate
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-giantFlange
Giant flange
Filter/Effect/Audio/LADSPA
Giant flange
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-gong
Gong model
Filter/Effect/Audio/LADSPA
Gong model
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-gongBeater
Gong beater
Filter/Effect/Audio/LADSPA
Gong beater
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-grain-scatter
Granular Scatter Processor
Filter/Effect/Audio/LADSPA
Granular Scatter Processor
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-gsm
GSM simulator
Filter/Effect/Audio/LADSPA
GSM simulator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-gverb
GVerb
Filter/Effect/Audio/LADSPA
GVerb
Juhana Sadeharju <kouhia at nic.funet.fi>, LADSPAification by Steve Harris <steve@plugin.org.uk>
Right_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-hard-gate
Hard Gate
Filter/Effect/Audio/LADSPA
Hard Gate
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-hardLimiter
Hard Limiter
Filter/Effect/Audio/LADSPA
Hard Limiter
Marcus Andersson
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-harmonicGen
Harmonic generator
Filter/Effect/Audio/LADSPA
Harmonic generator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-hermesFilter
Hermes Filter
Filter/Effect/Audio/LADSPA
Hermes Filter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-highpass-iir
Glame Highpass Filter
Filter/Effect/Audio/LADSPA
Glame Highpass Filter
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-hilbert
Hilbert transformer
Filter/Effect/Audio/LADSPA
Hilbert transformer
Steve Harris <steve@plugin.org.uk>
90deg_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
0deg_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-hpf
Simple High Pass Filter
Filter/Effect/Audio/LADSPA
Simple High Pass Filter
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-identity-audio
Identity (Audio)
Filter/Effect/Audio/LADSPA
Identity (Audio)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-identity-control
Identity (Control)
Source/Audio/LADSPA
Identity (Control)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
ladspa-imp
Impulse convolver
Filter/Effect/Audio/LADSPA
Impulse convolver
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-impulse-fc
Nonbandlimited single-sample impulses (Frequency: Control)
Source/Audio/LADSPA
Nonbandlimited single-sample impulses (Frequency: Control)
Andy Wingo <wingo at pobox dot com>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-interpolator
Control to Audio Interpolator
Source/Audio/LADSPA
Control to Audio Interpolator
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Interpolated_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-inv
Inverter
Filter/Effect/Audio/LADSPA
Inverter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-karaoke
Karaoke
Filter/Effect/Audio/LADSPA
Karaoke
Steve Harris <steve@plugin.org.uk>
Right_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Right_in
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_in
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lcrDelay
L/C/R Delay
Filter/Effect/Audio/LADSPA
L/C/R Delay
Steve Harris <steve@plugin.org.uk>
R_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
L_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
R_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
L_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lfoPhaser
LFO Phaser
Filter/Effect/Audio/LADSPA
LFO Phaser
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-limit-peak
Simple Limiter (Peak Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Limiter (Peak Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-limit-rms
Simple Limiter (RMS Envelope Tracking)
Filter/Effect/Audio/LADSPA
Simple Limiter (RMS Envelope Tracking)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lofi
Lo Fi
Filter/Effect/Audio/LADSPA
Lo Fi
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out_-Right-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Out_-Left-
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
In_-Right-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
In_-Left-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-logistic
Logistic Map Control Generator
Source/Audio/LADSPA
Logistic Map Control Generator
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lowpass-iir
Glame Lowpass Filter
Filter/Effect/Audio/LADSPA
Glame Lowpass Filter
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lp4pole-faraia-oa
4 Pole Low-Pass Filter with Resonance (FARAIA)
Filter/Effect/Audio/LADSPA
4 Pole Low-Pass Filter with Resonance (FARAIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Resonanz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Cutoff_Frequency
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lp4pole-fcrcia-oa
4 Pole Low-Pass Filter with Resonance (FCRCIA)
Filter/Effect/Audio/LADSPA
4 Pole Low-Pass Filter with Resonance (FCRCIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lpf
Simple Low Pass Filter
Filter/Effect/Audio/LADSPA
Simple Low Pass Filter
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-lsFilter
LS Filter
Filter/Effect/Audio/LADSPA
LS Filter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-matrixMSSt
Matrix: MS to Stereo
Filter/Effect/Audio/LADSPA
Matrix: MS to Stereo
Steve Harris <steve@plugin.org.uk>
Right
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Side
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Mid
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-matrixSpatialiser
Matrix Spatialiser
Filter/Effect/Audio/LADSPA
Matrix Spatialiser
Joern Nettingsmeier <nettings@folkwang-hochschule.de>
Output_R
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_L
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_R
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_L
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-matrixStMS
Matrix: Stereo to MS
Filter/Effect/Audio/LADSPA
Matrix: Stereo to MS
Steve Harris <steve@plugin.org.uk>
Side
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Mid
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Right
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-mbeq
Multiband EQ
Filter/Effect/Audio/LADSPA
Multiband EQ
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-mixer
Mixer (Stereo to Mono)
Filter/Effect/Audio/LADSPA
Mixer (Stereo to Mono)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_2
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_1
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-modDelay
Modulatable delay
Filter/Effect/Audio/LADSPA
Modulatable delay
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Delay_-s-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-multivoiceChorus
Multivoice Chorus
Filter/Effect/Audio/LADSPA
Multivoice Chorus
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-noise-source-white
Noise Source (White)
Source/Audio/LADSPA
Noise Source (White)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-noise-white
White Noise Source
Source/Audio/LADSPA
White Noise Source
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-notch-iir
Mag's Notch Filter
Filter/Effect/Audio/LADSPA
Mag's Notch Filter
Alexander Ehlert <mag@glame.de>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-null-ai
Null (Audio Input)
Sink/Audio/LADSPA
Null (Audio Input)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-null-ao
Null (Audio Output)
Source/Audio/LADSPA
Null (Audio Output)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-null-ci
Null (Control Input)
Source/Audio/LADSPA
Null (Control Input)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
ladspa-null-co
Null (Control Output)
Source/Audio/LADSPA
Null (Control Output)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
ladspa-organ
Organ
Source/Audio/LADSPA
Organ
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-peak
Peak Monitor
Sink/Analyzer/Audio/LADSPA
Peak Monitor
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-phasemod
Phase Modulated Voice
Source/Audio/LADSPA
Phase Modulated Voice
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pink-full-frequency
Pink Noise (full frequency range)
Source/Audio/LADSPA
Pink Noise (full frequency range)
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pink-interpolated-audio
Pink Noise (Interpolated)
Source/Audio/LADSPA
Pink Noise (Interpolated)
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pink-sh
Pink Noise (sample and hold)
Source/Audio/LADSPA
Pink Noise (sample and hold)
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pitchScale
Pitch Scaler
Filter/Effect/Audio/LADSPA
Pitch Scaler
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pitchScaleHQ
Higher Quality Pitch Scaler
Filter/Effect/Audio/LADSPA
Higher Quality Pitch Scaler
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-plate
Plate reverb
Filter/Effect/Audio/LADSPA
Plate reverb
Steve Harris <steve@plugin.org.uk>
Right_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pointerCastDistortion
Pointer cast distortion
Filter/Effect/Audio/LADSPA
Pointer cast distortion
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-product-iaia-oa
Signal Product (IAIA)
Filter/Effect/Audio/LADSPA
Signal Product (IAIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Product_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Second_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
First_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-product-iaic-oa
Signal Product (IAIC)
Filter/Effect/Audio/LADSPA
Signal Product (IAIC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Product_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
First_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-product-icic-oc
Signal Product (ICIC)
Source/Audio/LADSPA
Signal Product (ICIC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-pulse-fapa-oa
Bandlimited Variable Width Pulse Oscillator (FAPA)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Width Pulse Oscillator (FAPA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Pulse_Width
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pulse-fapc-oa
Bandlimited Variable Width Pulse Oscillator (FAPC)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Width Pulse Oscillator (FAPC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pulse-fcpa-oa
Bandlimited Variable Width Pulse Oscillator (FCPA)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Width Pulse Oscillator (FCPA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Pulse_Width
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-pulse-fcpc-oa
Bandlimited Variable Width Pulse Oscillator (FCPC)
Source/Audio/LADSPA
Bandlimited Variable Width Pulse Oscillator (FCPC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-quantiser100
Quantiser (100 Steps)
Filter/Effect/Audio/LADSPA
Quantiser (100 Steps)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output_Changed
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Quantised_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-quantiser20
Quantiser (20 Steps)
Filter/Effect/Audio/LADSPA
Quantiser (20 Steps)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output_Changed
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Quantised_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-quantiser50
Quantiser (50 Steps)
Filter/Effect/Audio/LADSPA
Quantiser (50 Steps)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output_Changed
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Quantised_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-random-fasa-oa
Random Wave Generator (FASA)
Filter/Effect/Audio/LADSPA
Random Wave Generator (FASA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Wave_Smoothness
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-random-fasc-oa
Random Wave Generator (FASC)
Filter/Effect/Audio/LADSPA
Random Wave Generator (FASC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-random-fcsa-oa
Random Wave Generator (FCSA)
Filter/Effect/Audio/LADSPA
Random Wave Generator (FCSA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Wave_Smoothness
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-random-fcsc-oa
Random Wave Generator (FCSC)
Source/Audio/LADSPA
Random Wave Generator (FCSC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-rateShifter
Rate shifter
Filter/Effect/Audio/LADSPA
Rate shifter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ratio-nada-oa
Signal Ratio (NADA)
Filter/Effect/Audio/LADSPA
Signal Ratio (NADA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Ratio_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Denominator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Numerator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ratio-nadc-oa
Signal Ratio (NADC)
Filter/Effect/Audio/LADSPA
Signal Ratio (NADC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Ratio_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Numerator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ratio-ncda-oa
Signal Ratio (NCDA)
Filter/Effect/Audio/LADSPA
Signal Ratio (NCDA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Ratio_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Denominator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ratio-ncdc-oc
Signal Ratio (NCDC)
Source/Audio/LADSPA
Signal Ratio (NCDC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-retroFlange
Retro Flanger
Filter/Effect/Audio/LADSPA
Retro Flanger
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-revdelay
Reverse Delay (5s max)
Filter/Effect/Audio/LADSPA
Reverse Delay (5s max)
Jesse Chappell <jesse at essej dot net>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ringmod-1i1o1l
Ringmod with LFO
Filter/Effect/Audio/LADSPA
Ringmod with LFO
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-ringmod-2i1o
Ringmod with two inputs
Filter/Effect/Audio/LADSPA
Ringmod with two inputs
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Modulator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-satanMaximiser
Barry's Satan Maximiser
Filter/Effect/Audio/LADSPA
Barry's Satan Maximiser
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sawtooth-fa-oa
Bandlimited Sawtooth Oscillator (FA)
Filter/Effect/Audio/LADSPA
Bandlimited Sawtooth Oscillator (FA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sawtooth-fc-oa
Bandlimited Sawtooth Oscillator (FC)
Source/Audio/LADSPA
Bandlimited Sawtooth Oscillator (FC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sc1
SC1
Filter/Effect/Audio/LADSPA
SC1
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sc2
SC2
Filter/Effect/Audio/LADSPA
SC2
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Sidechain
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sc3
SC3
Filter/Effect/Audio/LADSPA
SC3
Steve Harris <steve@plugin.org.uk>
Right_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Right_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Sidechain
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sc4
SC4
Filter/Effect/Audio/LADSPA
SC4
Steve Harris <steve@plugin.org.uk>
Right_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Right_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sc4m
SC4 mono
Filter/Effect/Audio/LADSPA
SC4 mono
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-se4
SE4
Filter/Effect/Audio/LADSPA
SE4
Steve Harris <steve@plugin.org.uk>
Right_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Right_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Left_input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sequencer16
Analogue Style 16 Step Sequencer
Filter/Effect/Audio/LADSPA
Analogue Style 16 Step Sequencer
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Value_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Step_Trigger
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gate_-Open_>_0-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sequencer32
Analogue Style 32 Step Sequencer
Filter/Effect/Audio/LADSPA
Analogue Style 32 Step Sequencer
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Value_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Step_Trigger
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gate_-Open_>_0-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sequencer64
Analogue Style 64 Step Sequencer
Filter/Effect/Audio/LADSPA
Analogue Style 64 Step Sequencer
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Value_Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Step_Trigger
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gate_-Open_>_0-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-shaper
Wave shaper
Filter/Effect/Audio/LADSPA
Wave shaper
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sifter
Signal sifter
Filter/Effect/Audio/LADSPA
Signal sifter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sinCos
Sine + cosine oscillator
Source/Audio/LADSPA
Sine + cosine oscillator
Steve Harris <steve@plugin.org.uk>
Cosine_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Sine_output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sine-faaa
Sine Oscillator (Freq:audio, Amp:audio)
Filter/Effect/Audio/LADSPA
Sine Oscillator (Freq:audio, Amp:audio)
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Amplitude
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequency_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sine-faac
Sine Oscillator (Freq:audio, Amp:control)
Filter/Effect/Audio/LADSPA
Sine Oscillator (Freq:audio, Amp:control)
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequency_-Hz-
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sine-fcaa
Sine Oscillator (Freq:control, Amp:audio)
Filter/Effect/Audio/LADSPA
Sine Oscillator (Freq:control, Amp:audio)
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Amplitude
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sine-fcac
Sine Oscillator (Freq:control, Amp:control)
Source/Audio/LADSPA
Sine Oscillator (Freq:control, Amp:control)
Richard Furse (LADSPA example plugins)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-singlePara
Single band parametric
Filter/Effect/Audio/LADSPA
Single band parametric
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sinusWavewrapper
Sinus wavewrapper
Filter/Effect/Audio/LADSPA
Sinus wavewrapper
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sledgehammer
Dynamic Sledgehammer
Filter/Effect/Audio/LADSPA
Dynamic Sledgehammer
CMT (http://www.ladspa.org/cmt, plugin by Nathaniel Virgo)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Carrier
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Modulator
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-smoothDecimate
Smooth Decimator
Filter/Effect/Audio/LADSPA
Smooth Decimator
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-split
Mono to Stereo splitter
Filter/Effect/Audio/LADSPA
Mono to Stereo splitter
Frank Neumann <franky@users.sourceforge.net>
Output_2
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_1
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-square-fa-oa
Bandlimited Square Oscillator (FA)
Filter/Effect/Audio/LADSPA
Bandlimited Square Oscillator (FA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-square-fc-oa
Bandlimited Square Oscillator (FC)
Source/Audio/LADSPA
Bandlimited Square Oscillator (FC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-stepMuxer
Step Demuxer
Filter/Effect/Audio/LADSPA
Step Demuxer
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_8
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_7
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_6
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_5
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_4
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_3
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_2
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_1
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Clock
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sum-iaia-oa
Signal Sum (IAIA)
Filter/Effect/Audio/LADSPA
Signal Sum (IAIA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Summed_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Second_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
First_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sum-iaic-oa
Signal Sum (IAIC)
Filter/Effect/Audio/LADSPA
Signal Sum (IAIC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Summed_Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
First_Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-sum-icic-oc
Signal Sum (ICIC)
Source/Audio/LADSPA
Signal Sum (ICIC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
ladspa-surroundEncoder
Surround matrix encoder
Filter/Effect/Audio/LADSPA
Surround matrix encoder
Steve Harris <steve@plugin.org.uk>
Rt
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Lt
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
S
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
C
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
R
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
L
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-svf
State Variable Filter
Filter/Effect/Audio/LADSPA
State Variable Filter
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-syncpulse-fapaga-oa
Clock Pulse Oscillator with Gate (FAPAGA)
Filter/Effect/Audio/LADSPA
Clock Pulse Oscillator with Gate (FAPAGA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Pulse_Width
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-syncpulse-fcpcga-oa
Clock Pulse Oscillator with Gate (FCPCGA)
Filter/Effect/Audio/LADSPA
Clock Pulse Oscillator with Gate (FCPCGA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-syncsquare-faga-oa
Clock Oscillator with Gate (FAGA)
Filter/Effect/Audio/LADSPA
Clock Oscillator with Gate (FAGA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gate
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequency
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-syncsquare-fcga-oa
Clock Oscillator with Gate (FCGA)
Filter/Effect/Audio/LADSPA
Clock Oscillator with Gate (FCGA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gate
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-syndrum
Syn Drum
Source/Audio/LADSPA
Syn Drum
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-tapeDelay
Tape Delay Simulation
Filter/Effect/Audio/LADSPA
Tape Delay Simulation
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-track-max-peak
Envelope Tracker (Maximum Peak)
Sink/Analyzer/Audio/LADSPA
Envelope Tracker (Maximum Peak)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-track-max-rms
Envelope Tracker (Maximum RMS)
Sink/Analyzer/Audio/LADSPA
Envelope Tracker (Maximum RMS)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-track-peak
Envelope Tracker (Peak)
Sink/Analyzer/Audio/LADSPA
Envelope Tracker (Peak)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-track-rms
Envelope Tracker (RMS)
Sink/Analyzer/Audio/LADSPA
Envelope Tracker (RMS)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-tracker-gaaadaia-oa
Signal Tracker (Audio Rates)
Filter/Effect/Audio/LADSPA
Signal Tracker (Audio Rates)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Decay_Rate_-Hz-_when_Gate_Low
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Attack_Rate_-Hz-_when_Gate_Low
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Decay_Rate_-Hz-_when_Gate_High
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Attack_Rate_-Hz-_when_Gate_High
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-tracker-gaacdcia-oa
Signal Tracker (Control Rates)
Filter/Effect/Audio/LADSPA
Signal Tracker (Control Rates)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Gatter
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-transient
Transient mangler
Filter/Effect/Audio/LADSPA
Transient mangler
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-triangle-fasa-oa
Bandlimited Variable Slope Triangle Oscillator (FASA)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Slope Triangle Oscillator (FASA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Slope
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-triangle-fasc-oa
Bandlimited Variable Slope Triangle Oscillator (FASC)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Slope Triangle Oscillator (FASC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Frequenz
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-triangle-fcsa-oa
Bandlimited Variable Slope Triangle Oscillator (FCSA)
Filter/Effect/Audio/LADSPA
Bandlimited Variable Slope Triangle Oscillator (FCSA)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Slope
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-triangle-fcsc-oa
Bandlimited Variable Slope Triangle Oscillator (FCSC)
Source/Audio/LADSPA
Bandlimited Variable Slope Triangle Oscillator (FCSC)
Mike Rawes <mike_rawes[at]yahoo.co.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-triplePara
Triple band parametric with shelves
Filter/Effect/Audio/LADSPA
Triple band parametric with shelves
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-valve
Valve saturation
Filter/Effect/Audio/LADSPA
Valve saturation
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-valveRect
Valve rectifier
Filter/Effect/Audio/LADSPA
Valve rectifier
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-vcf303
VCF 303
Filter/Effect/Audio/LADSPA
VCF 303
CMT (http://www.ladspa.org/cmt, plugin by David A. Bartold)
Out
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
In
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-vynil
VyNil (Vinyl Effect)
Filter/Effect/Audio/LADSPA
VyNil (Vinyl Effect)
Steve Harris <steve@plugin.org.uk>
Output_R
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_L
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_R
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_L
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-waveTerrain
Wave Terrain Oscillator
Filter/Effect/Audio/LADSPA
Wave Terrain Oscillator
Steve Harris <steve@plugin.org.uk>
z
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
y
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
x
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-wshape-sine
Wave Shaper (Sine-Based)
Filter/Effect/Audio/LADSPA
Wave Shaper (Sine-Based)
CMT (http://www.ladspa.org/cmt, plugin by Richard W.E. Furse)
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-xfade
Crossfade
Filter/Effect/Audio/LADSPA
Crossfade
Steve Harris <steve@plugin.org.uk>
Output_right
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_left
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_B_right
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_B_left
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_A_right
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_A_left
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-xfade4
Crossfade (4 outs)
Filter/Effect/Audio/LADSPA
Crossfade (4 outs)
Steve Harris <steve@plugin.org.uk>
Output_B_right
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_B_left
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_A_right
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Output_A_left
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_B_right
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_B_left
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_A_right
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input_A_left
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
ladspa-zm1
z-1
Filter/Effect/Audio/LADSPA
z-1
Steve Harris <steve@plugin.org.uk>
Output
source
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234
Input
sink
always
audio/x-raw-float, width=(int)32, rate=(int)[ 1, 2147483647 ], channels=(int)1, endianness=(int)1234