Good riddance.

git-svn-id: http://svn.drobilla.net/lad/trunk/slv2@1602 a436a847-0d15-0410-975c-d299462d15a1

11 files changed, 0 insertions, 914 deletions

diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 54caf7c..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,229 +0,0 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/Makefile.am b/Makefile.am
deleted file mode 100644
index a93ba3c..0000000
--- a/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@
-AUTOMAKE_OPTIONS = foreign
-EXTRA_DIST = COPYING INSTALL
-
-if HAVE_DOXYGEN
-DOC_DIR = doc
-dist-check-doxygen:
-else
-DOC_DIR =
-dist-check-doxygen:
-	@echo
-	@echo ' ******' You need doxygen installed to make dist.' ******'
-	@echo
-	@false
-endif
-
-SUBDIRS      = src slv2 utils hosts $(DOC_DIR) swig debian-sid
-DIST_SUBDIRS = src slv2 utils hosts doc swig debian-sid
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = slv2.pc
-
-dist-hook: dist-check-doxygen
-
-docs:
-	cd doc && make docs
-
-install-man:
-	cd doc && make install-man
-
-deb:
-	if [ -e debian ]; then \
-		echo "ERROR: ./debian exists, you must move it out of the way."; \
-	else \
-		ln -s debian-sid debian; \
-		dpkg-buildpackage -sn; \
-		rm debian; \
-	fi
-
diff --git a/acinclude.m4 b/acinclude.m4
deleted file mode 100644
index f5e2290..0000000
--- a/acinclude.m4
+++ /dev/null
@@ -1,285 +0,0 @@
-# Check for version of Jack MIDI API
-# Copyright (C) 2007 Nedko Arnaudov <nedko@arnaudov.name>
-# Distributed under the same terms as the Autoconf macro files.	
-AC_DEFUN([AC_JACK_MIDI_NFRAMES_CHECK], [
-AC_MSG_CHECKING([whether JACK MIDI functions need nframes parameter])
-AC_LANG_PUSH(C)
-AC_COMPILE_IFELSE(AC_LANG_PROGRAM([[
-#include <jack/jack.h>
-#include <jack/midiport.h>
-]], [[
-jack_midi_event_get(0, 0, 0, 0);
-]]), [jackmidi_nframes='yes'], [jackmidi_nframes='no'])
-AC_MSG_RESULT([$jackmidi_nframes])
-AC_LANG_POP()
-])
-
-
-##### http://autoconf-archive.cryp.to/ac_python_devel.html
-#
-# SYNOPSIS
-#
-#   AC_PYTHON_DEVEL([version])
-#
-# DESCRIPTION
-#
-#   Note: Defines as a precious variable "PYTHON_VERSION". Don't
-#   override it in your configure.ac.
-#
-#   This macro checks for Python and tries to get the include path to
-#   'Python.h'. It provides the $(PYTHON_CPPFLAGS) and
-#   $(PYTHON_LDFLAGS) output variables. It also exports
-#   $(PYTHON_EXTRA_LIBS) and $(PYTHON_EXTRA_LDFLAGS) for embedding
-#   Python in your code.
-#
-#   You can search for some particular version of Python by passing a
-#   parameter to this macro, for example ">= '2.3.1'", or "== '2.4'".
-#   Please note that you *have* to pass also an operator along with the
-#   version to match, and pay special attention to the single quotes
-#   surrounding the version number. Don't use "PYTHON_VERSION" for
-#   this: that environment variable is declared as precious and thus
-#   reserved for the end-user.
-#
-#   This macro should work for all versions of Python >= 2.1.0. As an
-#   end user, you can disable the check for the python version by
-#   setting the PYTHON_NOVERSIONCHECK environment variable to something
-#   else than the empty string.
-#
-#   If you need to use this macro for an older Python version, please
-#   contact the authors. We're always open for feedback.
-#
-# LAST MODIFICATION
-#
-#   2007-07-31
-#
-# COPYLEFT
-#
-#   Copyright (c) 2007 Sebastian Huber <sebastian-huber@web.de>
-#   Copyright (c) 2007 Alan W. Irwin <irwin@beluga.phys.uvic.ca>
-#   Copyright (c) 2007 Rafael Laboissiere <rafael@laboissiere.net>
-#   Copyright (c) 2007 Andrew Collier <colliera@ukzn.ac.za>
-#   Copyright (c) 2007 Matteo Settenvini <matteo@member.fsf.org>
-#   Copyright (c) 2007 Horst Knorr <hk_classes@knoda.org>
-#
-#   This program is free software: you can redistribute it and/or
-#   modify it under the terms of the GNU General Public License as
-#   published by the Free Software Foundation, either version 3 of the
-#   License, or (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-#   General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program. If not, see
-#   <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright
-#   owner gives unlimited permission to copy, distribute and modify the
-#   configure scripts that are the output of Autoconf when processing
-#   the Macro. You need not follow the terms of the GNU General Public
-#   License when using or distributing such scripts, even though
-#   portions of the text of the Macro appear in them. The GNU General
-#   Public License (GPL) does govern all other use of the material that
-#   constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the
-#   Autoconf Macro released by the Autoconf Macro Archive. When you
-#   make and distribute a modified version of the Autoconf Macro, you
-#   may extend this special exception to the GPL to apply to your
-#   modified version as well.
-
-AC_DEFUN([AC_PYTHON_DEVEL],[
-	#
-	# Allow the use of a (user set) custom python version
-	#
-	AC_ARG_VAR([PYTHON_VERSION],[The installed Python
-		version to use, for example '2.3'. This string
-		will be appended to the Python interpreter
-		canonical name.])
-
-	AC_PATH_PROG([PYTHON],[python[$PYTHON_VERSION]])
-	if test -z "$PYTHON"; then
-	   AC_MSG_ERROR([Cannot find python$PYTHON_VERSION in your system path])
-	   PYTHON_VERSION=""
-	fi
-
-	#
-	# Check for a version of Python >= 2.1.0
-	#
-	AC_MSG_CHECKING([for a version of Python >= '2.1.0'])
-	ac_supports_python_ver=`$PYTHON -c "import sys, string; \
-		ver = string.split(sys.version)[[0]]; \
-		print ver >= '2.1.0'"`
-	if test "$ac_supports_python_ver" != "True"; then
-		if test -z "$PYTHON_NOVERSIONCHECK"; then
-			AC_MSG_RESULT([no])
-			AC_MSG_FAILURE([
-This version of the AC@&t@_PYTHON_DEVEL macro
-doesn't work properly with versions of Python before
-2.1.0. You may need to re-run configure, setting the
-variables PYTHON_CPPFLAGS, PYTHON_LDFLAGS, PYTHON_SITE_PKG,
-PYTHON_EXTRA_LIBS and PYTHON_EXTRA_LDFLAGS by hand.
-Moreover, to disable this check, set PYTHON_NOVERSIONCHECK
-to something else than an empty string.
-])
-		else
-			AC_MSG_RESULT([skip at user request])
-		fi
-	else
-		AC_MSG_RESULT([yes])
-	fi
-
-	#
-	# if the macro parameter ``version'' is set, honour it
-	#
-	if test -n "$1"; then
-		AC_MSG_CHECKING([for a version of Python $1])
-		ac_supports_python_ver=`$PYTHON -c "import sys, string; \
-			ver = string.split(sys.version)[[0]]; \
-			print ver $1"`
-		if test "$ac_supports_python_ver" = "True"; then
-	   	   AC_MSG_RESULT([yes])
-		else
-			AC_MSG_RESULT([no])
-			AC_MSG_ERROR([this package requires Python $1.
-If you have it installed, but it isn't the default Python
-interpreter in your system path, please pass the PYTHON_VERSION
-variable to configure. See ``configure --help'' for reference.
-])
-			PYTHON_VERSION=""
-		fi
-	fi
-
-	#
-	# Check if you have distutils, else fail
-	#
-	AC_MSG_CHECKING([for the distutils Python package])
-	ac_distutils_result=`$PYTHON -c "import distutils" 2>&1`
-	if test -z "$ac_distutils_result"; then
-		AC_MSG_RESULT([yes])
-	else
-		AC_MSG_RESULT([no])
-		AC_MSG_ERROR([cannot import Python module "distutils".
-Please check your Python installation. The error was:
-$ac_distutils_result])
-		PYTHON_VERSION=""
-	fi
-
-	#
-	# Check for Python include path
-	#
-	AC_MSG_CHECKING([for Python include path])
-	if test -z "$PYTHON_CPPFLAGS"; then
-		python_path=`$PYTHON -c "import distutils.sysconfig; \
-           		print distutils.sysconfig.get_python_inc();"`
-		if test -n "${python_path}"; then
-		   	python_path="-I$python_path"
-		fi
-		PYTHON_CPPFLAGS=$python_path
-	fi
-	AC_MSG_RESULT([$PYTHON_CPPFLAGS])
-	AC_SUBST([PYTHON_CPPFLAGS])
-
-	#
-	# Check for Python library path
-	#
-	AC_MSG_CHECKING([for Python library path])
-	if test -z "$PYTHON_LDFLAGS"; then
-		# (makes two attempts to ensure we've got a version number
-		# from the interpreter)
-		py_version=`$PYTHON -c "from distutils.sysconfig import *; \
-			from string import join; \
-			print join(get_config_vars('VERSION'))"`
-		if test "$py_version" == "[None]"; then
-			if test -n "$PYTHON_VERSION"; then
-				py_version=$PYTHON_VERSION
-			else
-				py_version=`$PYTHON -c "import sys; \
-					print sys.version[[:3]]"`
-			fi
-		fi
-
-		PYTHON_LDFLAGS=`$PYTHON -c "from distutils.sysconfig import *; \
-			from string import join; \
-			print '-L' + get_python_lib(0,1), \
-		      	'-lpython';"`$py_version
-	fi
-	AC_MSG_RESULT([$PYTHON_LDFLAGS])
-	AC_SUBST([PYTHON_LDFLAGS])
-
-	#
-	# Check for site packages
-	#
-	AC_MSG_CHECKING([for Python site-packages path])
-	if test -z "$PYTHON_SITE_PKG"; then
-		PYTHON_SITE_PKG=`$PYTHON -c "import distutils.sysconfig; \
-		        print distutils.sysconfig.get_python_lib(0,0);"`
-	fi
-	AC_MSG_RESULT([$PYTHON_SITE_PKG])
-	AC_SUBST([PYTHON_SITE_PKG])
-
-	#
-	# libraries which must be linked in when embedding
-	#
-	AC_MSG_CHECKING(python extra libraries)
-	if test -z "$PYTHON_EXTRA_LIBS"; then
-	   PYTHON_EXTRA_LIBS=`$PYTHON -c "import distutils.sysconfig; \
-                conf = distutils.sysconfig.get_config_var; \
-                print conf('LOCALMODLIBS'), conf('LIBS')"`
-	fi
-	AC_MSG_RESULT([$PYTHON_EXTRA_LIBS])
-	AC_SUBST(PYTHON_EXTRA_LIBS)
-
-	#
-	# linking flags needed when embedding
-	#
-	AC_MSG_CHECKING(python extra linking flags)
-	if test -z "$PYTHON_EXTRA_LDFLAGS"; then
-		PYTHON_EXTRA_LDFLAGS=`$PYTHON -c "import distutils.sysconfig; \
-			conf = distutils.sysconfig.get_config_var; \
-			print conf('LINKFORSHARED')"`
-	fi
-	AC_MSG_RESULT([$PYTHON_EXTRA_LDFLAGS])
-	AC_SUBST(PYTHON_EXTRA_LDFLAGS)
-
-	#
-	# final check to see if everything compiles alright
-	#
-	AC_MSG_CHECKING([consistency of all components of python development environment])
-	AC_LANG_PUSH([C])
-	# save current global flags
-	LIBS="$ac_save_LIBS $PYTHON_LDFLAGS"
-	CPPFLAGS="$ac_save_CPPFLAGS $PYTHON_CPPFLAGS"
-	AC_TRY_LINK([
-		#include <Python.h>
-	],[
-		Py_Initialize();
-	],[pythonexists=yes],[pythonexists=no])
-
-	AC_MSG_RESULT([$pythonexists])
-
-        if test ! "$pythonexists" = "yes"; then
-	   AC_MSG_ERROR([
-  Could not link test program to Python. Maybe the main Python library has been
-  installed in some non-standard library path. If so, pass it to configure,
-  via the LDFLAGS environment variable.
-  Example: ./configure LDFLAGS="-L/usr/non-standard-path/python/lib"
-  ============================================================================
-   ERROR!
-   You probably have to install the development version of the Python package
-   for your distribution.  The exact name of this package varies among them.
-  ============================================================================
-	   ])
-	  PYTHON_VERSION=""
-	fi
-	AC_LANG_POP
-	# turn back to default flags
-	CPPFLAGS="$ac_save_CPPFLAGS"
-	LIBS="$ac_save_LIBS"
-
-	#
-	# all done!
-	#
-])
diff --git a/autogen.sh b/autogen.sh
deleted file mode 100755
index 7af4389..0000000
--- a/autogen.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/sh
-
-echo 'Generating necessary files...'
-rm -rf config
-mkdir -p config
-if [ -x "`which glibtoolize`" ]; then # OSX
-	glibtoolize --force
-else # Unix
-	libtoolize --force
-fi
-aclocal
-autoheader -Wall
-automake --foreign --add-missing
-autoconf
-
diff --git a/configure.ac b/configure.ac
deleted file mode 100644
index 6aafb5c..0000000
--- a/configure.ac
+++ /dev/null
@@ -1,219 +0,0 @@
-AC_PREREQ(2.59)
-
-AC_INIT([slv2],0.6.0,[dave@drobilla.net])
-
-AC_CONFIG_AUX_DIR([config])
-
-AC_CONFIG_SRCDIR([src/plugin.c])
-AC_CONFIG_SRCDIR([slv2/plugin.h])
-AC_CONFIG_SRCDIR([utils/lv2_list.c])
-AC_CONFIG_SRCDIR([swig/slv2.i])
-AC_CONFIG_HEADER([config/config.h])
-AM_INIT_AUTOMAKE
-
-# SLV2 interface version (libtool shared library versioning)
-#
-# current = incremented whenever the public API is changed 
-# revision = incremented when the implementation of current is changed
-# age = current library is both source and binary compatible with
-#       interfaces: current,current-1,...,current-age
-#
-# See libtool documentation for detailed documentation
-#
-# Version history:
-# 0.0.1 = 0,0,0
-# 0.1.0 = 2,0,0
-# 0.2.0 = 3,0,0
-# 0.3.0 = 4,0,0
-# 0.3.1 = 4,0,0
-# 0.3.2 = 5,0,1
-# 0.4.0 = 6,0,0
-# 0.4.1 = 6,0,0 (oops, should have been 6,1,0)
-# 0.4.2 = 6,0,0 (oops, should have been 6,2,0)
-# 0.4.3 = 6,0,0 (oops, should have been 6,3,0)
-# 0.4.4 = 7,0,1
-# 0.4.5 = 7,0,1
-# 0.5.0 = 8,0,0
-# 0.6.0 = 9,0,0 (SVN r1282)
-
-SLV2_VERSION="0.6.0"
-SLV2_API_CURRENT="9"
-SLV2_API_REVISION="0"
-SLV2_API_AGE="0"
-
-AC_SUBST(SLV2_API_CURRENT)
-AC_SUBST(SLV2_API_REVISION)
-AC_SUBST(SLV2_API_AGE)
-SLV2_SO_VERSION="${SLV2_API_CURRENT}:${SLV2_API_REVISION}:${SLV2_API_AGE}"
-AC_SUBST(SLV2_SO_VERSION)
-AC_SUBST(SLV2_VERSION)
-
-# This is cute... autohell FTW
-builddir=`pwd`
-cd $srcdir
-abs_srcdir=`pwd`
-cd $builddir
-
-SLV2_CFLAGS="-I$abs_srcdir"
-SLV2_LIBS="$abs_srcdir/src/.libs/libslv2.la"
-SLV2_SRCDIR="$abs_srcdir"
-AC_SUBST(SLV2_CFLAGS)
-AC_SUBST(SLV2_LIBS)
-AC_SUBST(SLV2_SRCDIR)
-
-CONFIG_H_PATH="$builddir/config/config.h"
-
-# Checks for compiler
-AM_PROG_CC_C_O
-
-# Library building stuff
-AC_PROG_LIBTOOL
-
-# LV2 core package
-PKG_CHECK_MODULES(LV2CORE, lv2core >= 1, , [AC_ERROR([SLV2 Requires the LV2 core package (http://lv2plug.in/spec/)])])
-
-# Check for debugging flag
-debug="no"
-AC_ARG_ENABLE(debug,
-	[AS_HELP_STRING(--enable-debug, [Enable debugging (false)])],
-	[debug="$enableval"])
-if test "$debug" = "yes"; then
-  CFLAGS="-O0 -g -DDEBUG -DLIBRDF_DEBUG"
-  CXXFLAGS="-O0 -g -DDEBUG -DLIBRDF_DEBUG"
-else
-  CFLAGS="$CFLAGS -DNDEBUG -DLIBRDF_DEBUG"
-  CXXFLAGS="$CFLAGS -DNDEBUG -DLIBRDF_DEBUG"
-fi
-
-# Check for strict flag
-strict="no"
-AC_ARG_ENABLE(strict,
-	[AS_HELP_STRING(--enable-strict, [Enable strict compiler warnings and errors (false)])],
-	[strict="$enableval"])
-if test "$strict" = "yes"; then
-  CFLAGS="$CFLAGS -std=c99 -pedantic -Wall -Wextra -Winit-self -Wno-unused-parameter"
-  CXXFLAGS="$CFLAGS -ansi -pedantic -Wall -Wextra -Wconversion -Winit-self -Wno-unused-parameter"
-fi
-
-# SWIG bindings
-bindings="no"
-AC_ARG_ENABLE(bindings,
-	[AS_HELP_STRING(--enable-bindings, [Build language bindings via SWIG (false)])],
-	[bindings="$enableval"])
-if test "$bindings" = "yes"; then
-  AC_CHECK_PROGS(SWIG, "swig swig-1.3")
-  if test "$SWIG" = ""; then
-  	AC_MSG_WARN("SWIG not found, language bindings disabled")
-  fi
-fi
-AM_CONDITIONAL(WITH_SWIG, [test "$bindings" = "yes"])
-
-# Check for binding languages
-mzscheme="no"
-chicken="no"
-if test "$bindings" = "yes"; then
-  AC_PYTHON_DEVEL([>= '2.3.0'])
-  AC_CHECK_HEADER([plt/escheme.h], [mzscheme="yes"], [mzscheme="no"])
-  AC_CHECK_HEADER([chicken.h], [chicken="yes"], [chicken="no"])
-fi
-AM_CONDITIONAL(WITH_PYTHON, [test ! "$PYTHON_VERSION" = "yes"])
-AM_CONDITIONAL(WITH_MZSCHEME, [test "$mzscheme" = "yes"])
-AM_CONDITIONAL(WITH_CHICKEN, [test "$chicken" = "yes"])
-
-# Check for Redland
-build_redland="no"
-AC_CHECK_PROG(REDLAND_CONFIG, redland-config, redland-config)
-if test "X$REDLAND_CONFIG" = X; then
-	AC_MSG_ERROR([SLV2 requires Redland (librdf), but redland-config not found.])
-else
-	build_redland="yes"
-	PKG_CHECK_MODULES(RAPTOR, raptor)
-	PKG_CHECK_MODULES(RASQAL, rasqal >= 0.9.14)
-	redland_major_version=`$REDLAND_CONFIG --version | \
-	  sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-	redland_minor_version=`$REDLAND_CONFIG --version | \
-	  sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-	redland_micro_version=`$REDLAND_CONFIG --version | \
-	  sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-	AC_MSG_CHECKING([for REDLAND version >= 1.0.6])
-	version_ok="no"
-	if test 1 -le $redland_major_version; then
-		if test 0 -le $redland_minor_version; then
-			if test 6 -le $redland_micro_version; then
-				version_ok="yes"
-			fi
-		fi
-	fi
-	if test $version_ok = "no"; then
-	    act=`$REDLAND_CONFIG --version`
-		AC_MSG_ERROR([REDLAND version >= 1.0.6 required; $act found])
-	else
-		AC_MSG_RESULT([yes])
-    fi
-	REDLAND_CFLAGS=`$REDLAND_CONFIG --cflags`
-	REDLAND_LIBS=`$REDLAND_CONFIG --libs`
-	AC_SUBST(REDLAND_CFLAGS)
-	AC_SUBST(REDLAND_LIBS)
-fi
-AM_CONDITIONAL(WITH_REDLAND, [test "$build_redland" = "yes"])
-
-# Check for JACK
-build_jack="yes"
-AC_ARG_ENABLE(jack,
-	[AS_HELP_STRING(--enable-jack, [Build JACK clients (true)])],
-	[ if test x$enable_jack = xno ; then build_jack=no ; fi ])
-if test "$build_jack" = "yes"; then
-	PKG_CHECK_MODULES(JACK, jack >= 0.102.29, build_jack="yes", build_jack="no")
-	AC_DEFINE(HAVE_JACK, 1, [Has JACK])
-	AC_JACK_MIDI_NFRAMES_CHECK()  	   	
-	if test "$jackmidi_nframes" == "yes"; then 	  	
-		AC_DEFINE([JACK_MIDI_NEEDS_NFRAMES], 1, [Defined if we JACK MIDI functions need nframes parameter.]) 	  	
-	fi
-else
-	AC_MSG_WARN("Sufficiently recent JACK not found, JACK clients will not be built.")
-fi
-AM_CONDITIONAL(WITH_JACK, [test "$build_jack" = "yes"])
-
-# Build documentation
-build_documentation="yes"
-AC_ARG_ENABLE(documentation,
-	[AS_HELP_STRING(--enable-documentation, [Build documentation (yes, if doxygen available)])],
-	[build_documentation="$enableval"])
-if test "$build_documentation" = "yes"; then
-	AC_CHECK_PROG(HAVE_DOXYGEN, doxygen, true, false)
-	if test $HAVE_DOXYGEN = "false"; then
-		AC_MSG_WARN([*** Doxygen not found, API documentation will not be built])
-		build_documentation="no"
-	fi
-fi
-AM_CONDITIONAL(HAVE_DOXYGEN, [test "x$build_documentation" = "xyes"])
-
-# Bolt on a few specific flags to CFLAGS that should always be used
-CXXFLAGS="$CXXFLAGS -ansi -pipe -fmessage-length=999 -DCONFIG_H_PATH=\\\"$CONFIG_H_PATH\\\""
-CFLAGS="$CFLAGS -std=c99 -pipe -fmessage-length=999 -DCONFIG_H_PATH=\\\"$CONFIG_H_PATH\\\""
-
-# Write output files
-AC_CONFIG_FILES([Makefile])
-AC_CONFIG_FILES([debian-sid/Makefile])
-AC_CONFIG_FILES([doc/Makefile])
-AC_CONFIG_FILES([doc/reference.doxygen])
-AC_CONFIG_FILES([hosts/Makefile])
-AC_CONFIG_FILES([slv2.pc])
-AC_CONFIG_FILES([slv2/Makefile])
-AC_CONFIG_FILES([src/Makefile])
-AC_CONFIG_FILES([swig/Makefile])
-AC_CONFIG_FILES([swig/python/Makefile])
-AC_CONFIG_FILES([swig/mzscheme/Makefile])
-AC_CONFIG_FILES([swig/chicken/Makefile])
-AC_CONFIG_FILES([utils/Makefile])
-
-AC_OUTPUT
-
-AC_MSG_RESULT([])
-AC_MSG_RESULT([**********************************************************************])
-AC_MSG_RESULT([SLV2 build configuration:])
-AC_MSG_RESULT([])
-AC_MSG_RESULT([Building JACK clients:     $build_jack])
-AC_MSG_RESULT([**********************************************************************])
-AC_MSG_RESULT([])
-
diff --git a/debian-sid/Makefile.am b/debian-sid/Makefile.am
deleted file mode 100644
index 757249d..0000000
--- a/debian-sid/Makefile.am
+++ /dev/null
@@ -1,8 +0,0 @@
-EXTRA_DIST = \
-	README \
-	changelog \
-	compat \
-	control \
-	copyright \
-	docs \
-	rules
diff --git a/doc/Makefile.am b/doc/Makefile.am
deleted file mode 100644
index fe3f6ff..0000000
--- a/doc/Makefile.am
+++ /dev/null
@@ -1,34 +0,0 @@
-dist_man_MANS = \
-	man/man3/slv2.3 \
-	man/man3/slv2_collections.3 \
-	man/man3/slv2_data.3 \
-	man/man3/slv2_library.3 \
-	man/man3/slv2_util.3 \
-	man/man3/slv2_world.3
-
-if HAVE_DOXYGEN
-man_MANS = $(dist_man_MANS)
-all: docs
-else
-man_mans =
-all:
-endif
-
-EXTRA_DIST = mainpage.dox reference.doxygen.in $(man_MANS)
-
-
-
-%.3:
-	make docs
-
-reference.doxygen: @SLV2_SRCDIR@/doc/reference.doxygen.in
-
-distclean-local:
-	rm -rf man html
-
-docs: reference.doxygen @SLV2_SRCDIR@/slv2/*.h
-	doxygen reference.doxygen
-
-# Don't install man pages with this target,
-# only install with install-man (for debian package building)
-install-data:
diff --git a/hosts/Makefile.am b/hosts/Makefile.am
deleted file mode 100644
index 9570a80..0000000
--- a/hosts/Makefile.am
+++ /dev/null
@@ -1,25 +0,0 @@
-AM_CFLAGS = -std=c99 -I$(top_srcdir) @REDLAND_CFLAGS@ @SLV2_CFLAGS@
-
-if WITH_JACK
-
-noinst_HEADERS = lv2_event.h lv2_event_helpers.h lv2_uri_map.h
-
-bin_PROGRAMS = lv2_jack_host lv2_simple_jack_host
-
-lv2_jack_host_CFLAGS = @JACK_CFLAGS@ $(AM_CFLAGS)
-
-lv2_jack_host_DEPENDENCIES = ../src/libslv2.la
-lv2_jack_host_LDADD        = ../src/libslv2.la @JACK_LIBS@ @REDLAND_LIBS@
-
-lv2_simple_jack_host_LDADD = ../src/libslv2.la @JACK_LIBS@ @REDLAND_LIBS@
-
-lv2_jack_host_SOURCES = \
-	jack_compat.h \
-	lv2_jack_host.c
-
-lv2_simple_jack_host_SOURCES = \
-	jack_compat.h \
-	lv2_simple_jack_host.c
-
-endif
-
diff --git a/slv2/Makefile.am b/slv2/Makefile.am
deleted file mode 100644
index 4c37778..0000000
--- a/slv2/Makefile.am
+++ /dev/null
@@ -1,21 +0,0 @@
-slv2includedir = $(includedir)/slv2
-
-slv2include_HEADERS = \
-	lv2_ui.h \
-	plugin.h \
-	pluginclass.h \
-	pluginclasses.h \
-	plugininstance.h \
-	plugins.h \
-	pluginui.h \
-	pluginuiinstance.h \
-	pluginuis.h \
-	port.h \
-	slv2.h \
-	types.h \
-	scalepoint.h \
-	scalepoints.h \
-	util.h \
-	value.h \
-	values.h \
-	world.h
diff --git a/src/Makefile.am b/src/Makefile.am
deleted file mode 100644
index 148fafb..0000000
--- a/src/Makefile.am
+++ /dev/null
@@ -1,24 +0,0 @@
-AM_CFLAGS = -std=c99 @LV2CORE_CFLAGS@ @SLV2_CFLAGS@ @REDLAND_CFLAGS@ @RAPTOR_CFLAGS@ -DLIBSLV2_SOURCE
-
-lib_LTLIBRARIES = libslv2.la
-libslv2_la_LIBADD = @REDLAND_LIBS@ @RAPTOR_LIBS@ -ldl
-libslv2_la_LDFLAGS = -version-info @SLV2_SO_VERSION@
-
-libslv2_la_SOURCES = \
-	plugin.c \
-	pluginclass.c \
-	pluginclasses.c \
-	plugininstance.c \
-	plugins.c \
-	pluginui.c \
-	pluginuiinstance.c \
-	pluginuis.c \
-	port.c \
-	query.c \
-	scalepoint.c \
-	scalepoints.c \
-	slv2_internal.h \
-	util.c \
-	value.c \
-	values.c \
-	world.c
diff --git a/utils/Makefile.am b/utils/Makefile.am
deleted file mode 100644
index f445519..0000000
--- a/utils/Makefile.am
+++ /dev/null
@@ -1,16 +0,0 @@
-EXTRA_DIST = ladspa.h
-
-AM_CFLAGS = -std=c99 -I$(top_srcdir) @REDLAND_CFLAGS@ @SLV2_CFLAGS@ @LV2CORE_CFLAGS@
-
-bin_PROGRAMS = lv2_list lv2_inspect
-noinst_PROGRAMS = ladspa2lv2
-
-lv2_list_SOURCES = lv2_list.c
-lv2_list_LDADD = ../src/libslv2.la 
-
-lv2_inspect_SOURCES = lv2_inspect.c
-lv2_inspect_LDADD = ../src/libslv2.la 
-
-ladspa2lv2_SOURCES = ladspa2lv2.c
-ladspa2lv2_LDADD = -ldl -lm @REDLAND_LIBS@
-