diff options
Diffstat (limited to 'gst')
-rw-r--r-- | gst/switch/gstswitch-marshal.list | 4 | ||||
-rw-r--r-- | gst/switch/gstswitch.c | 163 | ||||
-rw-r--r-- | gst/switch/gstswitch.h | 4 |
3 files changed, 117 insertions, 54 deletions
diff --git a/gst/switch/gstswitch-marshal.list b/gst/switch/gstswitch-marshal.list index 56014826..97c741cb 100644 --- a/gst/switch/gstswitch-marshal.list +++ b/gst/switch/gstswitch-marshal.list @@ -1,2 +1,2 @@ -UINT64:VOID -VOID:STRING,UINT64,UINT64 +INT64:VOID +VOID:STRING,INT64,INT64 diff --git a/gst/switch/gstswitch.c b/gst/switch/gstswitch.c index 5e2e4462..fd4a4a33 100644 --- a/gst/switch/gstswitch.c +++ b/gst/switch/gstswitch.c @@ -3,6 +3,7 @@ * Copyright (C) 2005 Ronald S. Bultje <rbultje@ronald.bitfreak.net> * Copyright (C) 2005 Jan Schmidt <thaytan@mad.scientist.com> * Copyright (C) 2007 Wim Taymans <wim.taymans@gmail.com> + * Copyright (C) 2007 Andy Wingo <wingo@pobox.com> * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public @@ -60,7 +61,7 @@ enum enum { - PAD_PROP_LAST_STOP_TIME = 1 + PAD_PROP_RUNNING_TIME = 1 }; enum @@ -119,6 +120,7 @@ static void gst_selector_pad_get_property (GObject * object, static GstPadClass *selector_pad_parent_class = NULL; +static gint64 gst_selector_pad_get_running_time (GstSelectorPad * pad); static void gst_selector_pad_reset (GstSelectorPad * pad); static gboolean gst_selector_pad_event (GstPad * pad, GstEvent * event); static GstCaps *gst_selector_pad_getcaps (GstPad * pad); @@ -163,10 +165,9 @@ gst_selector_pad_class_init (GstSelectorPadClass * klass) gobject_class->get_property = GST_DEBUG_FUNCPTR (gst_selector_pad_get_property); - g_object_class_install_property (gobject_class, PAD_PROP_LAST_STOP_TIME, - g_param_spec_uint64 ("last-stop-time", "Last stop time", - "Last stop time seen on pad", 0, G_MAXUINT64, GST_CLOCK_TIME_NONE, - G_PARAM_READABLE)); + g_object_class_install_property (gobject_class, PAD_PROP_RUNNING_TIME, + g_param_spec_int64 ("running-time", "Running time", + "Running time of stream on pad", 0, G_MAXINT64, 0, G_PARAM_READABLE)); gobject_class->finalize = gst_selector_pad_finalize; } @@ -174,6 +175,7 @@ gst_selector_pad_class_init (GstSelectorPadClass * klass) static void gst_selector_pad_init (GstSelectorPad * pad) { + gst_selector_pad_reset (pad); } static void @@ -193,21 +195,39 @@ gst_selector_pad_get_property (GObject * object, guint prop_id, GstSelectorPad *spad = GST_SELECTOR_PAD_CAST (object); switch (prop_id) { - case PAD_PROP_LAST_STOP_TIME:{ - GST_OBJECT_LOCK (object); - if (spad->active) - g_value_set_uint64 (value, spad->segment.last_stop); - else - g_value_set_uint64 (value, GST_CLOCK_TIME_NONE); - GST_OBJECT_UNLOCK (object); + case PAD_PROP_RUNNING_TIME: + g_value_set_int64 (value, gst_selector_pad_get_running_time (spad)); break; - } + default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } +static gint64 +gst_selector_pad_get_running_time (GstSelectorPad * pad) +{ + gint64 ret = 0; + + GST_OBJECT_LOCK (pad); + + if (pad->active) { + gint64 last_stop = pad->segment.last_stop; + + if (last_stop >= 0) + ret = gst_segment_to_running_time (&pad->segment, GST_FORMAT_TIME, + last_stop); + } + + GST_OBJECT_UNLOCK (pad); + + GST_DEBUG_OBJECT (pad, "running time: %" GST_TIME_FORMAT, + GST_TIME_ARGS (ret)); + + return ret; +} + static void gst_selector_pad_reset (GstSelectorPad * pad) { @@ -446,9 +466,9 @@ static GstStateChangeReturn gst_stream_selector_change_state (GstElement * element, GstStateChange transition); static GList *gst_stream_selector_get_linked_pads (GstPad * pad); static GstCaps *gst_stream_selector_getcaps (GstPad * pad); -static GstClockTime gst_stream_selector_block (GstStreamSelector * self); +static gint64 gst_stream_selector_block (GstStreamSelector * self); static void gst_stream_selector_switch (GstStreamSelector * self, - const gchar * pad_name, GstClockTime stop_time, GstClockTime start_time); + const gchar * pad_name, gint64 stop_time, gint64 start_time); static GstElementClass *parent_class = NULL; @@ -512,33 +532,61 @@ gst_stream_selector_class_init (GstStreamSelectorClass * klass) /** * GstStreamSelector::block: - * @streamselector: the streamselector element to emit this signal on + * @streamselector: the #GstStreamSelector * * Block all sink pads in preparation for a switch. Returns the stop time of - * the current switch segment, or #GST_CLOCK_TIME_NONE if there is no current + * the current switch segment, as a running time, or 0 if there is no current * active pad or the current active pad never received data. */ gst_stream_selector_signals[SIGNAL_BLOCK] = g_signal_new ("block", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstStreamSelectorClass, block), - NULL, NULL, gst_switch_marshal_UINT64__VOID, G_TYPE_UINT64, 0); + NULL, NULL, gst_switch_marshal_INT64__VOID, G_TYPE_INT64, 0); /** * GstStreamSelector::switch: - * @streamselector: the streamselector element to emit this signal on + * @streamselector: the #GstStreamSelector * @pad: name of pad to switch to - * @stop_time: time at which to close the previous segment, or - * #GST_CLOCK_TIME_NONE for the last time on the previously - * active pad - * @start_time: start time for new segment, or foo + * @stop_time: running time at which to close the previous segment, or -1 + * to use the running time of the previously active sink pad + * @start_time: running time at which to start the new segment, or -1 to + * use the running time of the newly active sink pad + * + * Switch to a new feed. The segment opened by the previously active pad, if + * any, will be closed, and a new segment opened before data flows again. + * + * This signal must be emitted when the element has been blocked via the <link + * linkend="GstStreamSelector-block">block</link> signal. + * + * If you have a stream with only one switch element, such as an audio-only + * stream, a stream switch should be performed by first emitting the block + * signal, and then emitting the switch signal with -1 for the stop and start + * time values. * - * Switch the given open file descriptor to multifdsink to write to and - * specify the burst parameters for the new connection. + * The intention of the @stop_time and @start_time arguments is to allow + * multiple switch elements to switch and maintain stream synchronization. + * When switching a stream with multiple feeds, you will need as many switch + * elements as you have feeds. For example, a feed with audio and video will + * have one switch element between the audio feeds and one for video. + * + * A switch over multiple switch elements should be performed as follows: + * First, emit the <link linkend="GstStreamSelector-block">block</link> + * signal, collecting the returned values. The maximum running time returned + * by block should then be used as the time at which to close the previous + * segment. + * + * Then, query the running times of the new audio and video pads that you will + * switch to. Naturally, these pads are on separate switch elements. Take the + * minimum running time for those streams and use it for the time at which to + * open the new segment. + * + * If @pad is the same as the current active pad, the element will cancel any + * previous block without adjusting segments. */ gst_stream_selector_signals[SIGNAL_SWITCH] = g_signal_new ("switch", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstStreamSelectorClass, switch_), - NULL, NULL, gst_switch_marshal_VOID__STRING_UINT64_UINT64, - G_TYPE_NONE, 3, G_TYPE_STRING, G_TYPE_UINT64, G_TYPE_UINT64); + NULL, NULL, gst_switch_marshal_VOID__STRING_INT64_INT64, + G_TYPE_NONE, 3, G_TYPE_STRING, G_TYPE_INT64, G_TYPE_INT64); klass->block = GST_DEBUG_FUNCPTR (gst_stream_selector_block); klass->switch_ = GST_DEBUG_FUNCPTR (gst_stream_selector_switch); @@ -580,9 +628,32 @@ gst_stream_selector_dispose (GObject * object) G_OBJECT_CLASS (parent_class)->dispose (object); } +/* Solve the following equation for B.timestamp, and set that as the segment + * stop: + * B.running_time = (B.timestamp - NS.start) / NS.abs_rate + NS.accum + */ +static gint64 +gst_segment_get_timestamp (GstSegment * segment, gint64 running_time) +{ + return (running_time - segment->accum) * segment->abs_rate + segment->start; +} + +static void +gst_segment_set_stop (GstSegment * segment, gint64 running_time) +{ + segment->stop = gst_segment_get_timestamp (segment, running_time); + segment->last_stop = -1; +} + +static void +gst_segment_set_start (GstSegment * segment, gint64 running_time) +{ + segment->start = gst_segment_get_timestamp (segment, running_time); +} + static void gst_stream_selector_set_active_pad (GstStreamSelector * self, - const gchar * pad_name, GstClockTime stop_time, GstClockTime start_time) + const gchar * pad_name, gint64 stop_time, gint64 start_time) { GstPad *pad; GstSelectorPad *old, *new; @@ -601,20 +672,18 @@ gst_stream_selector_set_active_pad (GstStreamSelector * self, old = GST_SELECTOR_PAD_CAST (self->active_sinkpad); new = GST_SELECTOR_PAD_CAST (pad); - if (old && old->active && !self->pending_stop - && GST_CLOCK_TIME_IS_VALID (stop_time)) { + if (old && old->active && !self->pending_stop && stop_time >= 0) { /* schedule a last_stop update if one isn't already scheduled, and a segment has been pushed before. */ memcpy (&self->pending_stop_segment, &old->segment, sizeof (self->pending_stop_segment)); - gst_segment_set_last_stop (&self->pending_stop_segment, - old->segment.format, stop_time); + gst_segment_set_stop (&self->pending_stop_segment, stop_time); self->pending_stop = TRUE; } - if (new && GST_CLOCK_TIME_IS_VALID (start_time)) { + if (new && new->active && start_time >= 0) { /* schedule a new segment push */ - new->segment.start = start_time; + gst_segment_set_start (&new->segment, start_time); new->segment_pending = TRUE; } @@ -842,10 +911,11 @@ gst_stream_selector_change_state (GstElement * element, return result; } -static GstClockTime +static gint64 gst_stream_selector_block (GstStreamSelector * self) { - GstClockTime ret = GST_CLOCK_TIME_NONE; + gint64 ret = 0; + GstSelectorPad *spad; GST_OBJECT_LOCK (self); @@ -853,20 +923,12 @@ gst_stream_selector_block (GstStreamSelector * self) GST_WARNING_OBJECT (self, "switch already blocked"); self->blocked = TRUE; + spad = GST_SELECTOR_PAD_CAST (self->active_sinkpad); - if (self->active_sinkpad) { - GstSelectorPad *spad = GST_SELECTOR_PAD_CAST (self->active_sinkpad); - - if (spad->active) { - ret = spad->segment.last_stop; - GST_DEBUG_OBJECT (self, "last stop on %" GST_PTR_FORMAT ": %" - GST_TIME_FORMAT, spad, GST_TIME_ARGS (ret)); - } else { - GST_DEBUG_OBJECT (self, "pad %" GST_PTR_FORMAT " never got data", spad); - } - } else { + if (self->active_sinkpad) + ret = gst_selector_pad_get_running_time (spad); + else GST_DEBUG_OBJECT (self, "no active pad while blocking"); - } GST_OBJECT_UNLOCK (self); @@ -884,7 +946,7 @@ gst_stream_selector_push_pending_stop (GstStreamSelector * self) GstSegment *seg = &self->pending_stop_segment; event = gst_event_new_new_segment_full (TRUE, seg->rate, - seg->applied_rate, seg->format, seg->start, seg->last_stop, seg->time); + seg->applied_rate, seg->format, seg->start, seg->stop, seg->stop); self->pending_stop = FALSE; } @@ -895,9 +957,10 @@ gst_stream_selector_push_pending_stop (GstStreamSelector * self) gst_pad_push_event (self->srcpad, event); } +/* stop_time and start_time are running times */ static void gst_stream_selector_switch (GstStreamSelector * self, const gchar * pad_name, - GstClockTime stop_time, GstClockTime start_time) + gint64 stop_time, gint64 start_time) { g_return_if_fail (self->blocked == TRUE); diff --git a/gst/switch/gstswitch.h b/gst/switch/gstswitch.h index b1699593..75b20ebf 100644 --- a/gst/switch/gstswitch.h +++ b/gst/switch/gstswitch.h @@ -58,9 +58,9 @@ struct _GstStreamSelector { struct _GstStreamSelectorClass { GstElementClass parent_class; - GstClockTime (*block) (GstStreamSelector *self); + gint64 (*block) (GstStreamSelector *self); void (*switch_) (GstStreamSelector *self, const gchar *pad_name, - GstClockTime stop_time, GstClockTime start_time); + gint64 stop_time, gint64 start_time); }; GType gst_stream_selector_get_type (void); |