diff options
Diffstat (limited to 'sys')
-rw-r--r-- | sys/dvb/gstdvbsrc.c | 174 |
1 files changed, 89 insertions, 85 deletions
diff --git a/sys/dvb/gstdvbsrc.c b/sys/dvb/gstdvbsrc.c index 37dee1a0..9193cec6 100644 --- a/sys/dvb/gstdvbsrc.c +++ b/sys/dvb/gstdvbsrc.c @@ -1134,7 +1134,8 @@ diseqc_send_msg (int fd, fe_sec_voltage_t v, struct diseqc_cmd *cmd, GST_ERROR ("Sending diseqc command failed"); return; } - //usleep (cmd->wait * 1000); + + usleep (cmd->wait * 1000); usleep (15 * 1000); if (ioctl (fd, FE_DISEQC_SEND_BURST, b) == -1) { @@ -1181,9 +1182,9 @@ gst_dvbsrc_tune (GstDvbSrc * object) struct dvb_frontend_parameters feparams; #endif fe_sec_voltage_t voltage; - int i; fe_status_t status; - + int i; + int j; unsigned int freq = object->freq; unsigned int sym_rate = object->sym_rate * 1000; @@ -1203,107 +1204,110 @@ gst_dvbsrc_tune (GstDvbSrc * object) } gst_dvbsrc_unset_pes_filters (object); - - switch (object->adapter_type) { - case FE_QPSK: - object->tone = SEC_TONE_OFF; - if (freq > 2200000) { - // this must be an absolute frequency - if (freq < SLOF) { - feparams.frequency = (freq - LOF1); + for (j = 0; j < 5; j++) { + switch (object->adapter_type) { + case FE_QPSK: + object->tone = SEC_TONE_OFF; + if (freq > 2200000) { + // this must be an absolute frequency + if (freq < SLOF) { + feparams.frequency = (freq - LOF1); + } else { + feparams.frequency = (freq - LOF2); + object->tone = SEC_TONE_ON; + } } else { - feparams.frequency = (freq - LOF2); - object->tone = SEC_TONE_ON; + // this is an L-Band frequency + feparams.frequency = freq; } - } else { - // this is an L-Band frequency - feparams.frequency = freq; - } - feparams.inversion = INVERSION_AUTO; - GST_DEBUG_OBJECT (object, "api version %d.%d", DVB_API_VERSION, - DVB_API_VERSION_MINOR); + feparams.inversion = INVERSION_AUTO; + GST_DEBUG_OBJECT (object, "api version %d.%d", DVB_API_VERSION, + DVB_API_VERSION_MINOR); #if DVB_API_VERSION == 3 && DVB_API_VERSION_MINOR == 3 - GST_DEBUG_OBJECT (object, "using multiproto driver"); - feparams.delsys.dvbs.symbol_rate = sym_rate; - feparams.delsys.dvbs.fec = object->code_rate_hp; + GST_DEBUG_OBJECT (object, "using multiproto driver"); + feparams.delsys.dvbs.symbol_rate = sym_rate; + feparams.delsys.dvbs.fec = object->code_rate_hp; #else - feparams.u.qpsk.symbol_rate = sym_rate; - feparams.u.qpsk.fec_inner = object->code_rate_hp; + feparams.u.qpsk.symbol_rate = sym_rate; + feparams.u.qpsk.fec_inner = object->code_rate_hp; #endif - GST_INFO_OBJECT (object, - "tuning DVB-S to L-Band:%u, Pol:%d, srate=%u, 22kHz=%s", - feparams.frequency, object->pol, sym_rate, - object->tone == SEC_TONE_ON ? "on" : "off"); - - if (object->pol == DVB_POL_H) - voltage = SEC_VOLTAGE_18; - else - voltage = SEC_VOLTAGE_13; - - if (object->diseqc_src == -1 || object->send_diseqc == FALSE) { - if (ioctl (object->fd_frontend, FE_SET_VOLTAGE, voltage) < 0) { - g_warning ("Unable to set voltage on dvb frontend device"); - } + GST_INFO_OBJECT (object, + "tuning DVB-S to L-Band:%u, Pol:%d, srate=%u, 22kHz=%s", + feparams.frequency, object->pol, sym_rate, + object->tone == SEC_TONE_ON ? "on" : "off"); + + if (object->pol == DVB_POL_H) + voltage = SEC_VOLTAGE_18; + else + voltage = SEC_VOLTAGE_13; + + if (object->diseqc_src == -1 || object->send_diseqc == FALSE) { + if (ioctl (object->fd_frontend, FE_SET_VOLTAGE, voltage) < 0) { + g_warning ("Unable to set voltage on dvb frontend device"); + } - if (ioctl (object->fd_frontend, FE_SET_TONE, object->tone) < 0) { - g_warning ("Error setting tone: %s", strerror (errno)); + if (ioctl (object->fd_frontend, FE_SET_TONE, object->tone) < 0) { + g_warning ("Error setting tone: %s", strerror (errno)); + } + } else { + GST_DEBUG_OBJECT (object, "Sending DISEqC"); + diseqc (object->fd_frontend, object->diseqc_src, voltage, + object->tone); + /* Once diseqc source is set, do not set it again until + * app decides to change it */ + //object->send_diseqc = FALSE; } - } else { - GST_DEBUG_OBJECT (object, "Sending DISEqC"); - diseqc (object->fd_frontend, object->diseqc_src, voltage, object->tone); - /* Once diseqc source is set, do not set it again until - * app decides to change it */ - object->send_diseqc = FALSE; - } - break; - case FE_OFDM: + break; + case FE_OFDM: - feparams.frequency = freq; + feparams.frequency = freq; #if DVB_API_VERSION == 3 && DVB_API_VERSION_MINOR == 3 #else - feparams.u.ofdm.bandwidth = object->bandwidth; - feparams.u.ofdm.code_rate_HP = object->code_rate_hp; - feparams.u.ofdm.code_rate_LP = object->code_rate_lp; - feparams.u.ofdm.constellation = object->modulation; - feparams.u.ofdm.transmission_mode = object->transmission_mode; - feparams.u.ofdm.guard_interval = object->guard_interval; - feparams.u.ofdm.hierarchy_information = object->hierarchy_information; + feparams.u.ofdm.bandwidth = object->bandwidth; + feparams.u.ofdm.code_rate_HP = object->code_rate_hp; + feparams.u.ofdm.code_rate_LP = object->code_rate_lp; + feparams.u.ofdm.constellation = object->modulation; + feparams.u.ofdm.transmission_mode = object->transmission_mode; + feparams.u.ofdm.guard_interval = object->guard_interval; + feparams.u.ofdm.hierarchy_information = object->hierarchy_information; #endif - feparams.inversion = object->inversion; + feparams.inversion = object->inversion; - GST_INFO_OBJECT (object, "tuning DVB-T to %d Hz\n", freq); - break; - case FE_QAM: - GST_INFO_OBJECT (object, "Tuning DVB-C to %d, srate=%d", freq, sym_rate); - feparams.frequency = freq; - feparams.inversion = object->inversion; - feparams.u.qam.fec_inner = object->code_rate_hp; - feparams.u.qam.modulation = object->modulation; - feparams.u.qam.symbol_rate = sym_rate; - break; - default: - g_error ("Unknown frontend type: %d", object->adapter_type); + GST_INFO_OBJECT (object, "tuning DVB-T to %d Hz\n", freq); + break; + case FE_QAM: + GST_INFO_OBJECT (object, "Tuning DVB-C to %d, srate=%d", freq, + sym_rate); + feparams.frequency = freq; + feparams.inversion = object->inversion; + feparams.u.qam.fec_inner = object->code_rate_hp; + feparams.u.qam.modulation = object->modulation; + feparams.u.qam.symbol_rate = sym_rate; + break; + default: + g_error ("Unknown frontend type: %d", object->adapter_type); - } - usleep (100000); - /* now tune the frontend */ + } + usleep (100000); + /* now tune the frontend */ #if DVB_API_VERSION == 3 && DVB_API_VERSION_MINOR == 3 - if (ioctl (object->fd_frontend, DVBFE_SET_PARAMS, &feparams) < 0) { + if (ioctl (object->fd_frontend, DVBFE_SET_PARAMS, &feparams) < 0) { #else - if (ioctl (object->fd_frontend, FE_SET_FRONTEND, &feparams) < 0) { + if (ioctl (object->fd_frontend, FE_SET_FRONTEND, &feparams) < 0) { #endif - g_warning ("Error tuning channel: %s", strerror (errno)); - } - for (i = 0; i < 15; i++) { - usleep (100000); - if (ioctl (object->fd_frontend, FE_READ_STATUS, &status) == -1) { - perror ("FE_READ_STATUS"); - break; + g_warning ("Error tuning channel: %s", strerror (errno)); } - if (status & FE_HAS_LOCK) { - break; + for (i = 0; i < 5; i++) { + usleep (100000); + if (ioctl (object->fd_frontend, FE_READ_STATUS, &status) == -1) { + perror ("FE_READ_STATUS"); + break; + } + GST_LOG_OBJECT (object, "status == 0x%02x", status); } + if (status & FE_HAS_LOCK) + break; } if (!(status & FE_HAS_LOCK)) return FALSE; |