1 files changed, 149 insertions, 0 deletions
diff --git a/doc/c/reading_and_writing.rst b/doc/c/reading_and_writing.rst
new file mode 100644
index 00000000..1180d03d
--- /dev/null
+++ b/doc/c/reading_and_writing.rst
@@ -0,0 +1,149 @@
+Reading and Writing
+===================
+
+.. default-domain:: c
+.. highlight:: c
+
+Reading and writing documents in a textual syntax is handled by the :struct:`SerdReader` and :struct:`SerdWriter`, respectively.
+Serd is designed around a concept of event streams,
+so the reader or writer can be at the beginning or end of a "pipeline" of stream processors.
+This allows large documents to be processed quickly in an "online" fashion,
+while requiring only a small constant amount of memory.
+If you are familiar with XML,
+this is roughly analogous to SAX.
+
+A common simple setup is to simply connect a reader directly to a writer.
+This can be used for things like pretty-printing,
+or converting a document from one syntax to another.
+This can be done by passing the sink returned by :func:`serd_writer_sink` to the reader constructor, :func:`serd_reader_new`.
+
+First,
+in order to write a document,
+an environment needs to be created.
+This defines the base URI and any namespace prefixes,
+which is used to resolve any relative URIs or prefixed names,
+and may be used to abbreviate the output.
+In most cases, the base URI should simply be the URI of the file being written.
+For example:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin env-new
+   :end-before: end env-new
+   :dedent: 2
+
+Namespace prefixes can also be defined for any vocabularies used:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin env-set-prefix
+   :end-before: end env-set-prefix
+   :dedent: 2
+
+We now have an environment set up for our document,
+but still need to specify where to write it.
+This is done by creating a :struct:`SerdOutputStream`,
+which is a generic interface that can be set up to write to a file,
+a buffer in memory,
+or a custom function that can be used to write output anywhere.
+In this case, we will write to the file we set up as the base URI:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin byte-sink-new
+   :end-before: end byte-sink-new
+   :dedent: 2
+
+The second argument is the page size in bytes,
+so I/O will be performed in chunks for better performance.
+The value used here, 4096, is a typical filesystem block size that should perform well on most machines.
+
+With an environment and byte sink ready,
+the writer can now be created:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin writer-new
+   :end-before: end writer-new
+   :dedent: 2
+
+Output is written by feeding statements and other events to the sink returned by :func:`serd_writer_sink`.
+:struct:`SerdSink` is the generic interface for anything that can consume data streams.
+Many objects provide the same interface to do various things with the data,
+but in this case we will send data directly to the writer:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin reader-new
+   :end-before: end reader-new
+   :dedent: 2
+
+The third argument of :func:`serd_reader_new` takes a bitwise ``OR`` of :enum:`SerdReaderFlag` flags that can be used to configure the reader.
+In this case only :enumerator:`SERD_READ_LAX` is given,
+which tolerates some invalid input without halting on an error,
+but others can be included.
+For example, passing ``SERD_READ_LAX | SERD_READ_RELATIVE`` would enable lax mode and preserve relative URIs in the input.
+
+Now that we have a reader that is set up to directly push its output to a writer,
+we can finally process the document:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin read-document
+   :end-before: end read-document
+   :dedent: 2
+
+Alternatively, one "chunk" of input can be read at a time with :func:`serd_reader_read_chunk`.
+A "chunk" is generally one top-level description of a resource,
+including any anonymous blank nodes in its description,
+but this depends on the syntax and the structure of the document being read.
+
+The reader pushes events to its sink as input is read,
+so in this scenario the data should now have been re-written by the writer
+(assuming no error occurred).
+To finish and ensure that a complete document has been read and written,
+:func:`serd_reader_finish` can be called followed by :func:`serd_writer_finish`.
+However these will be automatically called on destruction if necessary,
+so if the reader and writer are no longer required they can simply be destroyed:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin reader-writer-free
+   :end-before: end reader-writer-free
+   :dedent: 2
+
+Note that it is important to free the reader first in this case,
+since finishing the read may push events to the writer.
+Finally, closing the output with :func:`serd_close_output` will flush and close the output file,
+so it is ready to be read again later.
+
+.. literalinclude:: overview_code.c
+   :start-after: begin byte-sink-free
+   :end-before: end byte-sink-free
+   :dedent: 2
+
+Reading into a Model
+--------------------
+
+A document can be loaded into a model by setting up a reader that pushes data to a model "inserter" rather than a writer:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin inserter-new
+   :end-before: end inserter-new
+   :dedent: 2
+
+The process of reading the document is the same as above,
+only the sink is different:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin model-reader-new
+   :end-before: end model-reader-new
+   :dedent: 2
+
+Writing a Model
+---------------
+
+A model, or parts of a model, can be written by writing the desired range with :func:`serd_describe_range`:
+
+.. literalinclude:: overview_code.c
+   :start-after: begin write-range
+   :end-before: end write-range
+   :dedent: 2
+
+By default,
+this writes the range in chunks suited to pretty-printing with anonymous blank nodes (like "[ ... ]" in Turtle or TriG).
+Any rdf:type properties (written "a" in Turtle or TriG) will be written before any other properties of their subject.
+This can be disabled by passing the flag :enumerator:`SERD_NO_TYPE_FIRST`.